Part no. |
description |
Technical coordinates |
|
| 85025004 |
A device for remote control
Two-section, dual action |
Max. operating pressure: 250 bar
nominal flow rate: max. 100 l / min.
Tightening torque: 78 Nm
Connection: R 3/4 ", R 1/2"
Size: 250 x 160 x 90 mm |
|
Monoblock two-section has two double-acting pistons. The body is made from a special hydraulic casting. pistons were subjected to a special hardening and nickel. valve Load-
Sensing is equipped with a multi-way valve, which activates the signal Load-sensing. Both valves are valves partial antiphase, allowing for the control of mixing. Each port can simultaneously Impact valve fitted. |
| 850A15742KPL15 |
Hydraulic splitter line 1500 mm. |
element standard with 2 sliders control, pressure limiter
and check valve 40 l / min, 1 x floating function, 2x function
double-acting, 3/8 ", for further transmission of the pressure
Bushings are required to match, in the case of continuous impact
pressure relief valve should be set to the maximum |
|
| 850A15742KPL20 |
Hydraulic splitter line 2000 mm |
element standard with 2 sliders control, limiter
pressure and check valve 40 l / min, 1 x feature a floating, 2x
with the function of double-acting, 3/8 ", for further transmission
pressure sleeves are required to match, in the case of continuous
effect of a pressure relief valve should be set to
maximum |
 |
| 85081002 |
PRESSURE CARRY-OVER X-SD-5-O-AE
for pressure expansion |
|
|
| 85081005 |
THREADED FITTING X-SD-5-O-AEK (JD)
For permanent pressure (John Deere) |
|
| 850A15742KPL/Ew15 |
Hydraulic splitter line 1500 mm |
|
|
| 850A15742KPL/Ew20 |
Hydraulic splitter line 2000 mm |
|
 |
| |
| 85081002 |
The sleeve to transmit the pressure to the hydraulic distributor
45 l/min. |
|
 |
| 85081005 |
Screw plug for pressure resistant (John Deere) with hydraulic distributor
40 l/min. |
|
 |
All FREJUS replacement parts are not intended to be sold as OEM parts. OEM part numbers are provided for reference purposes only.
