Light Press Finn-Power:
They are easy to use and construction.
Can be used in agriculture and forestry, practical handles for easy transportation machinery.
Micrometer control provides smooth, highly accurate pressure. With the practical embodiment, the manual operation becomes very simple.
Specific advantages in P16HP:
Hydraulic Press Finn-Power P16 is ideal for crimping hydraulic hose ends in the workshop. Crimping can be applied to hydraulic hoses with single and double braid to DN 25. It is also suitable for crimping hoses braided steel quad to DN 20. The mobile device can be moved to make repairs at the point of failure.
P20
P20 Hydraulic Press Finn-Power suitable for hydraulic hoses with single and double braid to DN 40 and braided hoses quad to DN 32.
Mileage crimping is very simple:
• set the recommended pressure (under the table)
• introduced to the press with pre-assembled hose fittings
• start crimping while watching the indicator lamp
• the light comes on, immediately stop the crimping
• jaws do not perform any axial movement, so there is no need to control the movement of a snake
• at the end of crimping checked using the hose for leaks control device
>> Manual hand crimper with micrometre control, suitable for mobile applications due to its lightweight
Part no.
Cross reference number
Technical Features
81504001
P16HP
815P16HPDS
Hand portable terminal newspaper, manual adjustable micrometer and a large pump
>> Crimping machine - Press clamping
Part no.
Cross reference number
Technical Features
P16HPZ
81504000
Crimping range: 10-45 mm
Crimping force: 955 kN
Max. hose diameter : 1"
Set of crimping dies : P16
Motor (kW/PS):
Hand pump
Max. opening: 20 mm
>> Pneumatic pump for P16AP
Part no.
Cross reference number
Technical Features
815040001PSET
Pneumatic foot pump has an output ot up to 700 bar.
Tank capacity: 1.4 litres.
Kit contains
Pipe fittings, connectors and hose L = 2 mtr.
This set is suitable for a P16HP hose press.
>> P20HP Transport fork hand press, new hand pump requires 65% less effort Press performance: 2SN DM40 4SP DN32
Part no.
Cross reference number
Technical Features
P20HPL
81504059
Technical data:
Press performance :
2SN DN40
4SP DN32
Hose max.
1 1/2"
Motor (kW/KM):
Hand pump
Max. opening:
25 mm
Criming force:
1370kN
Crimping range:
10-61 mm
Jaw type:
P20
dimensions (dl. x szer. x wys.):
487 x 441 x 389 mm
Weight:
66 kg
>> - P20CS12V hose crimper with very high crimping force. This hose crimper is perfectly suited for use in service trolleys.
Part no.
Cross reference number
Technical Features
81504049
Technical data:
Criming force:
10-61 mm
Crimping force:
1370 kN
No. of crimpings / hour:
250
max. hose diameter:
1 1/2"
Set of crimping dies :
P20
Motor (kW/PS):
1,6/2,1
Max. opening:
25 mm
dimensions (DxSzxW):
571x533x387 mm
weight:
83 kg
» Crimping machines - Press clamping Finn-Power
Part no.
Cross reference number
Technical Features
81504002
P16AP
Newspapers portable terminal with pneumatic pump and micrometric adjustment, Crimping force: 955 kN
81504013
P20HP-1
Transport fork hand press, new hand pump requires 65% less effort
81504014
P20X
Service crimping machinê, electro-mechanical control
>> - P20MS - Hose crimper for one-off and small production runs with electro-mechanical control
Part no.
Cross reference number
Technical Features
81504047
Technical data:
Criming force:
10-61 mm
Crimping force:
1370 kN
No. of crimpings / hour:
850
Max. hose diameter :
1 1/2"
Set of crimping dies :
P20
Motor (kW/PS):
3/4; 400V
Max. opening:
25 mm
dimensions (Dx Szx W):
800x630x626 mm
weight:
157 kg
>> - P32X Service crimping machine, electro-mechanical control
Part no.
Cross reference number
Technical Features
81504048
Technical data:
Crimping range:
10-87 mm
Crimping force:
2000kN
No. of crimpings / hour:
230
Max. hose diameter:
2"
Set of crimping dies :
P32
Motor (kW/PS):
2,2/3; 400V
Max. opening:
33 mm
dimensions (D*Sz*W):
632x521x567 mm
weight:
150 kg
Crimping machines - P32MS Press clamp for series production of the electromechanical control.
Part no.
Technical Features
81504045
Hose: 4-spirals up to DN 51/2 "
Clamping range (mm): Ø 10 - 87
Max. Opening (mm): + 33
Engine (kW / hp): 4 / 5.5
400V
Stress (kN): 2000
Length x width x height (mm): 630 x 836 x 626
Weight (kg): 205
Opening (mm): 33
Ø hose: 2 "
Weight: 157 kg
Press for serial production, with electromechanical regulation.
Advantages:
- a compact version for small-lot production
- increased work efficiency due to the optimization of the cycle time (reduction of unloaded heights)
- quick exchange of jaws
- special system (accessories)
- work using automatic control or foot switch (accessories)
- modern embellishment, ergonomic with flat surfaces
- smooth adjustment of the micrometer screw.
Tools: standard jaws - P32 sets.
Technical data: theoretical number of crimps per hour: 850 (at opening 10mm)