>> Back
CUT-OUT VALVE ASV-06
This valve is used in dual-pump systems with different pressure levels. At a pre-set pressure, the low-pressure pump cuts out, and the high-pressure pump supplies pressure on its own.
Nom. operating pressure PN: PN 250 bar Connection: 3/8 "- 1.1 / 4" BSP Flow rate: 35 - 100 l / m Operating temperature: -20 ° C to 90 ° C Construction: aluminum housing Internal leakage: 3cc (50 ° C, 21 cSt; 200 bar) Hysteresis: 90% |
 |
| |
AP |
BP-U |
T |
M |
AP |
BP |
AP max. |
BP max. |
U max. |
P max. |
|
| Part no. |
(BSP) |
(BSP) |
(BSP) |
(BSP) |
(bar) |
(bar) |
(l/min) |
(l/min) |
(l/min) |
(bar) |
Opak. |
| 85002040 |
1/4" |
3/8" |
1/2" |
1/4" |
180-350 |
20-70 |
10 |
25 |
30 |
210 |
1 |
| 85002041 |
3/8" |
1/2" |
3/4" |
1/4" |
180-350 |
0-50 |
20 |
45 |
55 |
210 |
1 |
| 85002042 |
1/2" |
3/4" |
1" |
1/4" |
180-350 |
10-80 |
30 |
80 |
100 |
210 |
1 |
| 85002043 |
3/4" |
1" |
1 1/4" |
1/4" |
180-350 |
20-70 |
50 |
150 |
180 |
210 |
1 |
| LIFT-LIMITING VALVE HBV-R (M16X1,5) |
|
Part no. |
description |
Technical data: |
|
| 85038001 |
LIFT-LIMITING VALVE HBV-R |
This valve is for limiting the stroke of a hydraulic cylinder. The val
- Connection (BSP):M16x1,5
- P max (bar):250
- Q max (l/min):60
Technical data:Max. working pressure: 250 bar Nominal flow: max. 60l/min. Starting torque: 30 Nm ports: M 16 x 1.5 Dimensions: 110 x 50 x 50 mm |
 |
This valve is used to limit the stroke of a hydraulic cylinder. The valve is provided with a check valve, so that it is possible when turning off the stroke movement, to influence the pressure to the lift cylinder.
Nom. operating pressure PN: PN 350 bar Connection: 12L - 15L Flow: 60 -80 l / m Operating temperature: -25 ° C to +100 ° C Model: Steel Case chromium (VI)-free coated Dimensions: 12.7 cm x 5 cm x 5 cm |
|
|
| 85099055 |
STROKE LIMITER HBV-12L (M18X1.5) |
Self-stroke limitation single-acting hydraulic cylinders. In the initial position the HBV is open. A rope connected to the cylinder rod and the handle actuates the switch handle in the tensioned state. Thus, the HBKH is set to locked position, whereby the flow is interrupted. The cylinder rod stops at that position.
. Nom Operating pressure PN: PN 350 bar Connection: 12L - 15L Flow: 60 -80 l / m Operating temperature: -25 ° C to + 100 ° C Design: Steel housing chromium (VI) -free coating.
For automatic limiting of the stroke of a single-acting cylinder. In o
- Connection (BSP):12L (M18x1,5)
- P max (bar):350
- Q max (l/min):60
- Nominal width:DN 10
- Connection: 12 L
- Technical data: working pressure: 350 bar
|
 |
NON-RETURN VALVE RV-R-04
Check valves can be used as anti-cavitation, biasing or check valve.
Connection: 1/4 "- 3/4" BSP Operating temperature: -25 ° C to +100 ° C Model: Steel Case chromium (VI)-free coated
| Part no. |
Connection(BSP) |
P max. (bar) |
Q max. (l/min) |
Opening pressure (bar) |
|
| 85002016 |
1/4" |
300 |
12 |
5,0 |
| 85002017 |
3/8" |
300 |
30 |
5,0 |
| 85002018 |
1/2" |
300 |
45 |
5,0 |
| 85002019 HIT |
3/4" |
300 |
85 |
5,0 |
| 85002020 |
1" |
300 |
140 |
5,0 |
| 85002021 |
1 1/4" |
300 |
200 |
5,0 |
| 85002022 |
1 1/2" |
300 |
310 |
5,0 |
| 85002023 |
2" |
200 |
|
0,35 |
LOCKABLE NON-RETURN VALVE 1/4" ESRV-D-04L
This valve is used for e.g. locking out a double-acting hydraulic cylinder. It consists of two lockable non-return valves. The locking occurs internally from the opposite pressure line. One of each cylinder bore is locked so that no movement of the cylinder due to leakage is possible.
Connection: 3/8 "-1 / 2" BSP Operating temperature: -25 ° C to +100 ° C Model: Steel Case chromium (VI)-free coated |
|
Part no. |
Connection(BSP) |
P max. (bar) |
Q max. (l/min) |
Control pressure rate: |
 |
| 85002024 |
1/4" |
350 |
25 |
1:4 |
| 85002025 |
3/8" |
350 |
35 |
1:4 |
| 85002026 |
1/2" |
350 |
50 |
1:4 |
| 85002027 |
3/4" |
350 |
100 |
1:3,6 |
SHUTTLE VALVE WV-04
This valve can be connected to two different oil circuits. It releases the oil with the highest pressure, and locks out the other circuit. To fit as anti-cavitation valve, alarm valve in LS systems or for opening of brakes.
Normal operating pressure PN: PN 350 bar Connection: 3/8 "- 3/4" BSP Flow rate: 30 - 80 l / m Operating temperature: -25 ° C to +100 ° C Model: Steel Case chromium (VI)-free coated |
 |
Part no. |
Connection(BSP) |
P max. (bar) |
Q max. (l/min) |
 |
| 85002037 |
1/4" |
350 |
20 |
| 85002038 |
3/8" |
350 |
40 |
| 85002039 |
1/2" |
350 |
60 |
>>Back
All FREJUS replacement parts are not intended to be sold as OEM parts. OEM part numbers are provided for reference purposes only. |
